Frequency Division Multiplexing - Telecommunications
FDM (frequency-division multiplexing) is a scheme in which numerous signals are combined for transmission on a single communications line or channel. Each signal is assigned a different frequency (subchannel) within the main channel.
A typical analog Internet connection via a twisted pair telephone line operates at the digital equivalent of 28,800 bits per second. The analog signal, consisting of a frequency-modulated audio tone, requires approximately three kilohertz (3 kHz) of bandwidth for accurate and reliable data transfer. Twisted-pair lines are common in households and small businesses. But major telephone cables, operating between large businesses, government agencies, and municipalities, are capable of much larger bandwidths. Suppose a long-distance cable is available with a bandwidth allotment of three megahertz (3 MHz). This is 3,000 kHz, so in theory, it is possible to place 1,000 signals, each 3 kHz wide, into the long-distance channel. The circuit that does this is known as a multiplexer. It accepts the input from each individual end user, and generates a signal on a different frequency for each of the inputs. This results in a high-bandwidth, complex signal containing data from all the end users. At the other end of the long-distance cable, the individual signals are separated out by means of a circuit called a demultiplexer, and routed to the proper end users. A two-way communications circuit requires a multiplexer/demultiplexer at each end of the long-distance, high-bandwidth cable.
When FDM is used in a communications network, each input signal is sent and received at maximum speed at all times. This is its chief asset. However, if many signals must be sent along a single long-distance line, the necessary bandwidth is large, and careful engineering is required to ensure that the system will perform properly. In some systems, a different scheme, known as Time-Division Multiplexing, is used instead.